Banner SI-HG63 Hinge Style Switches Bedienungsanleitung

DatasheetSI-HG(Z)63 Series Safety Interlock Switches attached with a load-bearing hinge• Safety switch is integrated into a highly robust PBT housing

SpecificationsContact Rating3 A @ 230V ac max., 1.0 A @ 24V dc max.2.5 kV max. transient toleranceEuropean Rating:Ui = 250VUe = 230V AC, 24V DCIthe =

ExampleA guard with a 40 mm aluminum profile (A) and a width of 900 mm (B) is safeguarded by SI-HG63.. safety interlocking switch. Theswitching point

4.0 mm(0.16")19.5 mm(0.77")147.0 mm(5.79")45.0 mm(1.77")63.0 mm(2.48")6.3 mm(0.25")M12X118 mm(0.71")33.0 mm(1.30)&q

Blank HingeModel Construction Description DimensionsSI-HG63A Stainless Steel Blank hinge; same mechanical specificationsas SI-HG(Z)63 Series hinge swi

IEC 61508 Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related SystemsEC Declaration of Conformity (DOC)Banner Engineerin

NOTE: This symbol for a positive-opening safety contact (IEC 60947-5-1) is used in the switching dia-gram to identify the point in actuator travel w

CAUTION: End-of-Travel StopDo not use the safety switch as a mechanical or end-of-travel stop.The movement or rotation of the guard must be limited su

3. Verify that the axis of rotation is identical for all hinges used. Typically, this is accomplished by using a straight edge along the longflat edge

Figure 7. Red to green color ring7. Insert the supplied plugs into the topside of the hinge, and the bottom of the switch, to protect the switch from

Figure 10. Remove the plugs3. Remove the hinge portion from the switch.Figure 11. Remove the hinge4. Lift the red plastic washer from the switch. Disc

Figure 14. Align to "B"7. Press the switch element into the enclosure again until it reaches the internal stop.8. Install a new red plastic

Connection to a MachineElectrical connection is via a 6-pin dual-key M12/micro-style QD and cordsets (see Cordsets on page 12).Perform a risk assessme

When multiple safety interlock switches are series connected, the failure of one switch in the system may be masked or not be detectedat all. The foll