Banner Q45 Namur DC Series Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sensoren Banner Q45 Namur DC Series herunter. Banner Q45 Namur DC Series User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 10
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Intrinsically safe DC sensors
Intrinsically safe sensors with the rugged design and exceptional optical performance
of Q45 series sensors
Use with approved switching amplifiers that have intrinsically safe input circuits
Output passes ≤ 1.2 mA in the “dark” condition and ≥ 2.1 mA in the “light” condition
Internal multi-turn SENSITIVITY (Gain) control accessible beneath hinged, o-ring
sealed top cover
Models are available with an integral cable or a quick-disconnect connector
Supply voltage: 5 to 15V dc
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious
injury or death. This device does NOT include the self-checking redundant circuitry necessary to allow its
use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-
energized sensor output condition.
Standard 2 m (6.5 ft) cable models are listed. To order the 9 m (30 ft) cable model, add suffix "W/30" to the cabled model number (Q459E
W/30). Models with a QD connector require a mating cable (see Accessories list).
Opposed Models - Emitter (E) and Receiver (R)
The opposed mode models operate at 880 nm infrared with a range of 6 meters (20 feet).
Models Cable Output Type Excess Gain Beam Pattern
Q459E 2 m (6.5 ft)
Constant current
≤1.2 mA dark
≥2.1 mA light
1
10
100
1.0 m
3.3 ft
10 m
33 ft
100 m
330 ft
0.1 m
0.33 ft
E
X
C
E
S
S
G
A
I
N
DISTANCE
1000
Q45AD9 E/R
Opposed Mode
4.8 m
16 ft
6 m
20 ft
3.6 m
12 ft
2.4 m
8 ft
1.2 m
4 ft
0
0
50 mm
100 mm
150 mm
50 mm
100 mm
150 mm
0
2 in
4 in
6 in
2 in
4 in
6 in
DISTANCE
Q45AD9 E/R
Opposed Mode
Q459EQ 4-Pin Euro QD
Q45AD9R 2 m (6.5 ft)
Q45AD9RQ 4-Pin Euro QD
Retroreflective Models
The retroreflective mode models operate at 680 nm, visible red. Retroreflective range is specified using one model BRT-3 P retroreflector
(3-inch diameter). Actual sensing range may be more or less than specified, depending upon the efficiency and reflective area of the
retroreflector(s) in use.
Q45 NAMUR Sensors
P/N 038343 Rev. H 4/10/2013
0 038343 8
Seitenansicht 0
1 2 3 4 5 6 7 8 9 10

Inhaltsverzeichnis

Seite 1 - Q45 NAMUR Sensors

Intrinsically safe DC sensors• Intrinsically safe sensors with the rugged design and exceptional optical performanceof Q45 series sensors• Use with ap

Seite 2

e) Associated Apparatus is not required for installation of the devices within a Division 2 hazardous (classified) location. The maximumvoltage for Di

Seite 3

Models Range Cable Output Type Excess Gain Beam PatternNon-Polarized1101001000.10 m.33 ft1.0 m3.3 ft10 m33 ft.01 m.033 ftEXCESSGAINDISTANCEQ45AD9LVRet

Seite 4 - Q45 NAMUR Sensors

Models Focus Cable Output Type Excess Gain Beam PatternQ45AD9CV38 mm(1.5 in.")Spotsize atfocus:1.3 mm(0.05in.)2 m (6.5 ft)Constant Current≤1.2 mA

Seite 5 - Wiring Connections

Infrared, 880 nmModels Range Cable Output Type Excess Gain Beam PatternQ45AD9FRangevariesby sens-ingmodeand fiberopticsused2 m (6.5 ft)Constant Curren

Seite 6

Wiring ConnectionsNAMUR Sensors with Attached Cable NAMUR Sensors with Quick-DisconnectNAMUR SensorHazardous Area≤ 15V dcPowerOutputSensorInputNon-haz

Seite 7 - Accessories

SIGNAL (red) LED lights whenever the sensor sees itsmodulated light sourceConstructionMolded thermoplastic polyester housing, o-ring sealedtransparent

Seite 8

DimensionsNAMUR Series Opposed, Retro, and Diffuse Sensing Modes (Model Suffix E, R, D, DL, LP, and LV)Cabled Models Quick-Disconnect 4-pin Euro-style

Seite 9 - Front of Sensor

4-Pin Threaded M12/Euro-Style Cordsets (for use with NAMUR sensors)Model Length Style Dimensions PinoutMQD9-406RA 1 = Brown2 = Blue1.83 m (6 ft) Righ

Seite 10 - Q45 NAMUR Sensors

Mounting BracketsHole center spacing: A = 51, A to B = 25.4Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1Hole center spacing: A to B=31.8, B to C=19.0

Verwandte Modelle: Q45 Series

Kommentare zu diesen Handbüchern

Keine Kommentare