Banner R58 Registration Mark Sensors Bedienungsanleitung PDF herunterladen (Seite 6)

Banner Engineering Corp.•Minneapolis,MNU.S.A

www.bannerengineering.com•Tel:763.544.3164

6 P/N 122928 rev. C

R58 Expert

™

Registration Mark Sensors

SETUP Mode

SETUPmodeisusedtocongurediscretesensoroutputresponsefor:

 • LightorDarkOperate

 • 30-millisecondpulsestretcher(OFF-delay),ifrequired

 • 30-millisecondON-delay,ifrequired.

It is also used to disable one or more sensing beam colors, to force the sensor to use a

particular color. It will be necessary to access SETUP mode only if the settings which result

from TEACH mode conﬁguration are not the settings required for the application or if a delay

is required. The status LEDs indicate the output response conﬁguration when the sensor is in

RUNmode,asshowninFigure4.

Change the output response settings or disable sensing beam color(s) as shown in the table

on page 7.

NOTE:IfSETUPmodeprogrammingisinterruptedandremainsinactivefor60seconds,

the sensor returns to RUN mode with the most recent settings (i.e., exits and saves

current selection).

Figure 4. Output response conﬁguration options

No delay

OFF-delay

ON-delay

OFF-delay

ON-delay

OFF-delay

ON-delay

Increment or decrement through the 8 possible setting combinations

Double-Pulse or

Static Push Button

Single-Pulse or

Dynamic Push Button

Figure 5. LED color conﬁguration options

All Colors Red Green Blue

Red and

Green

Red and

Blue

Green and

Blue

Increment or decrement through the 7 possible setting combinations

Double-Pulse or

Static Push Button

Single-Pulse or

Dynamic Push Button

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Banner R58 Registration Mark Sensors Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Banner R58 Registration Mark Sensors