Banner Q10 Series Bedienungsanleitung PDF herunterladen (Seite 2)

Q10 Series

page 2 Banner Engineering Corporation

Quick Disconnect (QD) Cables

28 mm max.

(1.1 in)

ø10 mm max.

(0.4 in)

The following is the selection of cables available for the Q10 QD models

DImensionsStyle Model Length For use with

3-pin

Pico Style

straight

PKG3-2 2 m (6.5 ft)

All Q10 sensors with

quick-disconnect fitting

Black Wire

Blue Wire

Brown Wire

Pinout

20 mm

(0.8 in)

25 mm max.

(1.0 in)

ø12 mm max.

(0.5 in)

3-pin

Pico Style

right-angle

PKW3-2 2 m (6.5 ft)

Product Specifications

Sensing Beam

Adjustments Diffuse models (only); single-turn, top-mounted SENSITIVITY control for adjustment of system gain (turn

clockwise to increase)

Supply Protection Circuitry Protected against reverse polarity

Output Configuration SPST solid-state dc switch;

Choose NPN (current sinking) or PNP (current sourcing) models

Choose light operate (N.O.) or dark operate (N.C.) models

Output Rating 150 mA maximum

Off-state leakage current: <10 microamps at 30V dc;

On-state saturation voltage: <0.5V at 10 mA dc; <1.5V at 150 mA dc

Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short-circuit of outputs

Overload trip point ≥220mA, typical, at 20ºC

Output Response Time Opposed mode: 8 ms "on", 4 ms "off"; Diffuse mode: 3 ms "on" and "off"

Indicators Opposed mode receivers and diffuse mode sensors have two LEDs: Green and Yellow

GREEN glowing steadily = power to sensor is "on"

GREEN flashing = output is overloaded

YELLOW glowing steadily = light is sensed

YELLOW flashing = marginal excess gain (1-1.5x) in light condition

Emitters have one Green LED to indicate when power to sensor is "on"

Repeatability Opposed mode: 1.0 ms; Diffuse mode: 0.75 ms

Construction Housings are black ABS; Rated UL 94V0

Lenses are hermetically-sealed glass; lens covers are clear acrylic

Circuitry is epoxy-encapsulated and completely sealed

Stainless steel M2.5 mounting hardware is included

Environmental Rating

IP54 (NEMA 5)

Connections 2 m (6-1/2 ft) attached cable, or 3-pin pico-style quick-disconnect fitting;

Cables for QD models are purchased separately

Operating Temperature -40º to +70ºC (-40º to 158ºF); Maximum relative humidity 90% at 50ºC (non-condensing)

Infrared, 880 nm

Supply Voltage and Current 10 to 30V dc (10% maximum ripple); Emitter or receiver: 15 mA; Diffuse models: 20 mA

(exclusive of load)

1 2 3 4

Q10 Series 1

Kommentare zu diesen Handbüchern

Keine Kommentare

Banner Q10 Series Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Banner Q10 Series